PHS P High Speed Belt Cleaner

The Belle Banne PHS P High Speed belt cleaner is typically referred to as a “secondary” cleaner, as it is usually installed in conjunction with a “primary” belt cleaner that is located at the material discharge point.

It is designed to be positioned on a flat, stable section of belt in close proximity to the head pulley or a flat return and / or hold down roller.

It comprises a pair of side assemblies, a pole and a series of “blades” each comprising a rubber cushion and a tip. The blades are 150mm wide.

The side assemblies can be either the standard Bolt Tensioner (BT), a Secondary Spring Tensioner (SST) or an Inverted Secondary Spring Tensioner (SST-I). Tip Tension is stored in the rubber cushions, and also in the springs when using a SST or SST-I. When using a Hydraulic Autonomous Tensioner the tension is also stored in the hydraulic system.

PHS Belt Cleaners can handle reversing belt applications where the belt travels backwards (such as trippers), however they are not suitable for belts where the material flows in both directions.

For more challenging applications, multiple PHS Belt Cleaners can be installed in close series.

Available to suit your belt widths from 450mm to 3000mm, in stainless or mild steel, the PHS Belt cleaner will satisfy your cleaning needs.

There are many advantages to the PHS belt cleaner as listed below.

For more detailed information on our PHS Cushions, Tips and Side Assemblies download the Technical Flyers from this page.

INSTALLATION, OPERATION AND MAINTENANCE MANUALS:

Our IOMM’s give you a thorough insight to the PHS Belt Cleaner.

You can download the IOMM straight from this page. Click here

PHS BELT CLEANER INDIVIDUAL 2D PDF DRAWINGS AND 3D MODELS:

Click here to access 2D drawings and 3D models of our PHS Belt Cleaners

HCST Primary Belt Cleaner

We have designed the HCST primary belt cleaner for use on the head pulley. It is suitable for demanding applications. Whether it is the only cleaner in use on the conveyor, or the first cleaner in a high performance cleaning system, the HCST Belt cleaner should be your first choice.

Available in all sizes to suit your belt width, in stainless or mild steel, and with multiple blade options, the HCST Belt cleaner will satisfy your cleaning needs.

Belle Banne developed the HCST Belt cleaner as a primary belt cleaner suitable for demanding applications.

Whether it is the only cleaner in use on a conveyor, or the first in a high performance cleaning system, the Belle Banne HCST Belt cleaner should be your first choice.

HCST PRIMARY BELT CLEANER ARM SIZES:

5 different suspension arm sizes are available to match your pulley diameter. These make certain that the cleaner is positioned correctly for optimum performance every time.

The HCST Belt cleaner consists of individual 200 mm segmented blades, each one mounted on a rubber cushion. Separate blades ensure constant blade to belt contact on uneven surfaces, guaranteeing maximum cleanliness.

INSTALLATION, OPERATION AND MAINTENANCE MANUALS:

Our IOMM’s give you a thorough insight to the HCST Belt Cleaner.

You can download the IOMM straight from this page. Click here

HCST BELT INDIVIDUAL 2D PDF DRAWINGS AND 3D MODELS:

Click here to access 2D drawings and 3D models of our HCST Belt Cleaners

H Primary Belt Cleaner

The H primary belt cleaner is designed for use on the head pulley, suitable for demanding applications. Whether it is the only cleaner in use on the conveyor, or the first cleaner in a high performance cleaning system, the H Belt cleaner should be your first choice.

Available in all sizes to suit your belt width, in stainless or mild steel, and with multiple blade options, the H Belt cleaner will satisfy your cleaning needs.

The Belle Banne H Belt cleaner has been the leader in belt cleaning technology for more than 30 years and was developed by Belle Banne as a primary belt cleaner suitable for demanding applications.

Whether it is the only cleaner in use on a conveyor, or the first in a high performance cleaning system, the Belle Banne H Belt cleaner should be your first choice.

H Primary Belt Cleaner Arm Sizes:

5 different suspension arm sizes are available to match your pulley diameter, and make certain that the cleaner
is positioned correctly for optimum performance every time.

The H Belt cleaner consists of individual 200 mm segmented blades, each one mounted on a rubber cushion. Separate blades ensure constant blade to belt contact on uneven surfaces, guaranteeing maximum cleanliness.

Installation, Operation and Maintenance Manuals:

Our IOMM’s give you a thorough insight to the H Belt Cleaners. You can download the IOMM’s for the H Belt Cleaner, H Belt Cleaner with Spring Tensioner and also the H Belt Cleaner with Compact Arms straight from this page.

H Belt Individual 2D pdf drawings and 3D models:

To access 2D drawings and 3D models of our H Belt Cleaners – click here

P Belt Secondary Cleaner

The Belle Banne P Belt secondary cleaner has been a successful secondary cleaner for over 30 years. Teamed with a Belle Banne primary cleaner, or by itself, it has proved effective in maintaining a clean conveyor belt across diverse applications.

Ideally positioned just back from the head pulley, the Belle Banne P Belt secondary cleaner is compact enough to fit in most chute applications and sits close enough to the pulley to ensure the material fines are directed back into the regular material flow.

Available in all sizes to suit your belt width, and in a range of materials to optimize life and performance, the Belle Banne P Belt cleaner is a smart choice if you want to eliminate carry back from your conveyor system.

Belle Banne’s belt conveyor products have been successfully used in the Australian materials-handling industry since the early 1970s. Belle Banne’s products are designed to work as a holistic system, ensuring that the correct products are selected for the correct application. They provide optimal conveyor system performance, resulting in increased productivity and lower costs of spares and labour through reduced conveyor downtime.

Belle Banne Conveyor Products aims to supply clients with quality products at industry leading prices, with the support and service that allows these products to perform to their design potential.

To access 2D drawings and 3D models of our P Belt Cleaners – click here

R Belt Secondary Cleaner

The Belle Banne R Belt secondary cleaner has been a successful secondary cleaner for over 30 years. Designed for use in reversing applications, and teamed with a Belle Banne primary cleaner, or by itself, it has proved effective in maintaining a clean conveyor belt across diverse applications.

Ideally positioned just back from the head pulley, the Belle Banne R Belt secondary cleaner is compact enough to fit in most chute applications and sits close enough to the pulley to ensure the material fines are directed back into the regular material flow.

Available in all sizes to suit your belt width, and in a range of materials to optimize life and performance, the Belle Banne R Belt cleaner is a smart choice if you want to eliminate carry-back from your conveyor system.

The cleaner is easily adjusted with a single bolt on each side. Build up of residue is reduced by the high quality polymer deflectors. It is easy to install and only needs a vertical height of 200mm so making it compact. The R Belt is ideal on reversing belts and conveyors which runback.

The Belle Banne R Belt secondary cleaners can remove up to 97% of your carry back when teamed with a Belle Banne primary cleaner.

To access 2D drawings and 3D models of our R Belt Cleaners – click here

U Belt Secondary Cleaner

The original Belle Banne U Belt secondary cleaner is unmatched for superior cleaning efficiency – especially in tough applications requiring the removal of wet and sticky material.

The patented U shaped blade conforms to the belt allowing the carbide tips to scrape stubborn materials off the belt while the rubber backing squeegees wet materials.

The dual spring tension system maintains low, uniform blade pressure across the entire belt width. The U shaped blade of the U Belt Secondary Cleaner and offset pole intensify cleaning power in the material carrying centre of the belt.

The U Belt is unbeatable as the final cleaner in a complete cleaning system. Teamed with a Belle Banne primary cleaner, the Belle Banne U Belt delivers results that are unmatched for cleaning performance and efficiency

The Belle Banne U Belt secondary cleaners can remove up to 97% of your carry back when teamed with a Belle Banne primary cleaner.

To access 2D drawings and 3D models of our U Belt Cleaners – click here

AdvantEdge Compact Space Primary Belt Cleaner

The Belle Banne AdvantEdge Compact Space primary belt cleaner is a simple, quick and effective cleaner.

It is similar to the AdvantEdge standard primary cleaner but has a shorter height making it ideal for those compact spaces.

Mounted on the head pulley, it features a single, long lasting urethane blade incorporating the patent-pending “Bubble Back” profile.

This profile ensures constant blade tension as the blade wears and uses more of the blade for cleaning than competitive brands.

The do it yourself maintenance results in fast blade change outs to ensure your conveyor belt stays running when you need it.

The Belle Banne AdvantEdge cleaner delivers effective cleaning without blowing your budget.

To access 2D drawings and 3D models of our AdvantEdge Compact Space (CS) Primary Belt Cleaners – click here

AdvantEdge Primary Belt Cleaner

The Belle Banne AdvantEdge primary belt cleaner is a simple, quick and effective cleaner.

Mounted on the head pulley, it features a single, long lasting urethane blade incorporating the patent-pending “Bubble Back” profile.

This profile ensures constant blade tension as the blade wears and uses more of the blade for cleaning than competitive brands.

The do it yourself maintenance results in fast blade change outs to ensure your conveyor belt stays running when you need it.

The Belle Banne AdvantEdge cleaner delivers effective cleaning without blowing your budget.

To access 2D drawings and 3D models of our AdvantEdge Belt Cleaners – click here

Torsion Plough

The Torsion plough from Belle Banne Conveyor Products is designed for the return side of the belt. It’s purpose is to remove any material, rocks or debris from the conveyor belt.

It is installed prior to the tail pulley or take up pulleys and protects the belt, pulley and lagging from damage or wear.

Our torsion arm is designed to apply a light amount of constant pressure to our poly blades which enables it to deflect material off the belt.

A design feature of the Belle Banne Torsion arm is that it is a two piece clamp arrangement, removing the need to cut or replace poles on ceased torsion arms saving time and money.

The Belle Banne Torsion Plough is available for standard or heavy duty applications in galvanised or stainless steel.

TORSION PLOUGH FEATURES:

Protects the belt, pulley and lagging from damage / wear
Deflects material from belt
Two piece clamp arrangement
Standard Duty or Heavy Duty
Comes in Mild or Stainless Steel
Standard Duty suitable for belt widths 600mm – 2400mm
Heavy Duty suitable for belt widths 900mm – 2600mm

Belle Banne’s tried and tested primary, secondary and internal belt cleaners, combined with its skirting systems and tracking devices, deliver improved conveyor performance.

Click here to access 2D drawings and 3D models of our Standard Torsion Plough

Click here to access 2D drawings and 3D models of our Heavy Duty Plough

Belle Vee Plough

The Belle Vee Plough belt cleaner is an effective solution for protecting your tail pulley and belt from damage caused by spillage and debris that finds itself on the inside of your conveyor. Positioned just prior to your tail pulley or just in front of Gravity Take ups, the Belle Vee plough will deflect material from the belt ensuring it does not go around the tail pulley causing damage to both the pulley and your belt. The Belle Vee Plough has highly durable urethane blades, which fits virtually any conveyor structure.

The floating design ensures constant blade to belt contact and minimal adjustment over the life of the blade.

Belle Banne’s unique design means that shipping of the plough is contained within one box, and the ability to assemble on site means no heavy lifting is required to position the plough.

VEE PLOUGH BELT CLEANER FEATURES:

Discharges debris to both sides.
“Floating” blade.
Belts from 450mm – 1800mm wide.
Highly durable urethane blades.
Easy to install.
Universal mounting hardware.
Fits virtually any conveyor structure.

Belle Banne’s tried and tested primary, secondary and internal belt cleaners, combined with its skirting systems and tracking devices, deliver improved conveyor performance.

All belt conveyor products are available in mild steel and stainless steel, and with a choice of tungsten carbide and polyurethane blades.

INSTALLATION, OPERATION AND MAINTENANCE MANUALS:

Our IOMM’s give you a thorough insight to our ploughs. You can download the IOMM for the Diagonal Plough and HD Twin Pole Belle Vee Plough direct from this page.

PLOUGH 2D PDF DRAWINGS AND 3D MODELS:

Click here to access the Single Pole Vee Plough drawings page.

Click here to access the Heavy Duty Twin Pole Vee Plough drawings page.

Click here to access the Diagonal Plough drawings page.