The Belle Banne AdvantEdge Compact Space primary belt cleaner is a simple, quick and effective...
PHS P High Speed Belt Cleaner
The Belle Banne PHS P High Speed belt cleaner is typically referred to as a “secondary” cleaner, as it is usually installed in conjunction with a “primary” belt cleaner that is located at the material discharge point.
It is designed to be positioned on a flat, stable section of belt in close proximity to the head pulley or a flat return and / or hold down roller.
It comprises a pair of side assemblies, a pole and a series of “blades” each comprising a rubber cushion and a tip. The blades are 150mm wide.
The side assemblies can be either the standard Bolt Tensioner (BT), a Secondary Spring Tensioner (SST) or an Inverted Secondary Spring Tensioner (SST-I). Tip Tension is stored in the rubber cushions, and also in the springs when using a SST or SST-I. When using a Hydraulic Autonomous Tensioner the tension is also stored in the hydraulic system.
PHS Belt Cleaners can handle reversing belt applications where the belt travels backwards (such as trippers), however they are not suitable for belts where the material flows in both directions.
For more challenging applications, multiple PHS Belt Cleaners can be installed in close series.
Available to suit your belt widths from 450mm to 3000mm, in stainless or mild steel, the PHS Belt cleaner will satisfy your cleaning needs.
There are many advantages to the PHS belt cleaner as listed below.
For more detailed information on our PHS Cushions, Tips and Side Assemblies download the Technical Flyers from this page.
INSTALLATION, OPERATION AND MAINTENANCE MANUALS:
Our IOMM’s give you a thorough insight to the PHS Belt Cleaner.
You can download the IOMM straight from this page. Click here
PHS BELT CLEANER INDIVIDUAL 2D PDF DRAWINGS AND 3D MODELS:
Click here to access 2D drawings and 3D models of our PHS Belt Cleaners
There are many advantages to the PHS Belt Cleaner, some of which are listed below:
- 3 different tip sizes available 10, 15 and 25mm to suit different maintenance schedules
- 3 different tensioner types available – Bolt, Spring and Hydrualic
- Tried and tested cushion design
- Cost effective due to cushion and tip life consistency
- Suitable for high speed belts and abrasive materials
- Can be installed where there is limited room and in difficult applications
- High quality standard components
Coal, Iron Ore, Hard Rock, Heavy Metals, Sand and Gravel, Recycling, Power Generation and Steel Mills. Contact BBCP for more information on your application.
Table of Specification
|Belt (mm)||Pole Diam (mm)||MILD STEEL||STAINLESS STEEL|
|Item Code||Ordering Number||Item Code||Ordering Number|