The Belle Banne PHS (P High Speed) BT (Bolt Tension) Belt Cleaner is typically referred to as a “secondary” cleaner, as it is usually installed in conjunction with a “primary” belt cleaner that is located at the material discharge point.
It is designed to be positioned on a flat, stable section of belt in close proximity to the head pulley or a flat return and / or hold down roller.
It comprises a pair of side assemblies, a pole and a series of “blades” each comprising a rubber cushion and a tungsten tip. The blades are 150mm wide.
PHS BT Belt Cleaners can handle reversing belt applications where the belt occasionally travels backwards (such as trippers), however they are not suitable for belts where the material flows in both directions.
For more challenging applications, multiple PHS Belt Cleaners can be installed in close series.
Available to suit your belt widths from 450mm to 3000mm, in stainless or mild steel, the PHS BT Belt cleaner will satisfy your cleaning needs.
There are many advantages to the PHS belt cleaner as listed below.
Every cleaner in our P & PHS Belt Cleaner range is also available with a Combi LiteTM pole. Utilising proprietary manufacturing techniques, Combi LiteTM poles are produced in a way that minimises localised stresses and are up to 70% lighter than equivalent steel poles.
An additional benefit of our Combi LiteTM pole is that it can be used on either H-LITETM, P-LITETM or PHS-LITETM belt cleaners, providing you with an opportunity to reduce inventory costs.
Features & Benefits
- 3 different tip sizes available 10, 15 and 25mm to suit different maintenance schedules
- Tried and tested cushion design
- Cost effective due to cushion and tip life consistency
- Suitable for high speed belts and abrasive materials
- Can be installed where there is limited room and in difficult applications
- High quality standard components
Coal, Iron Ore, Hard Rock, Heavy Metals, Sand and Gravel, Recycling, Power Generation and Steel Mills. Contact BBCP for more information on your application.
|BELT WIDTH (MM)||BLADE WIDTH (MM)||POLE LENGTH (MM)||POLE DIA (MM)||ITEM CODES|
|MILD STEEL||STAINLESS STEEL|